PolVac Corporation

Service of Vacuum Pump Systems

Service of Vacuum
Pump Systems

(610) 625-1505

2442 Emrick Blvd.
Bethlehem, PA 18020
Info@PolVac.com

Adixen Pfeiffer Replacement Motor 2005, 2010, 2015, 2021 I, SD, C1, C2 Pumps, 1-Phase, 115/230 VAC

By

These new replacement 3/4 horsepower 1-phase motors are for the Adixen Pfeiffer rotary vane vacuum pumps, models 2005, 2010, 2015, 2021 for the I, SD, C1, and C2 series rotary vane vacuum pumps. These replacement motors are for 1-phase 115/230 VAC operation with ON/OFF switch.

Pfeiffer Adixen Electrical Motor is certified with major international standards (UL, CSA, CE) and offers two voltage ranges:

  • Low voltage: 100-110 V at 50 Hz and 100-120 V at 60Hz
  • High voltage: 200-230 V at 50 Hz and 200-230 V at 60 Hz

Agilent / Varian DS602 Dual Stage Rotary Vane Pump, Rebuilt

By

The DS 602 is a dual-stage oil-sealed rotary vane pump that delivers a pumping speed of 25.0 m3/h at 50 Hz or 17.6 CFM at 60 Hz, and a base pressure of <2 × 10–3 mbar. The DS 602 operates at a very quiet sound pressure, and is available with either a universal-voltage single-phase electric motor, with integral power switch, or an optional three-phase motor.

An inlet isolation valve is integrated into the pump to close off the inlet port whenever power to the pump is interrupted. This antibackstream valve maintains vacuum in the roughing, or foreline, and prevents pump oil from contaminating the vacuum chamber. The DS 602 has a manual gas ballast valve, that when opened, allows the pump to achieve its rated water-vapor handling specification of 550 g/hr.

This DS602 is Fully Rebuilt by PolVac Corp. It is equipped with a  1 Ph 115/220 VAC Voltage motor, pump is currently set to 220 Voltage, can be easily changed to 115 Voltage. DS602 Rotary Vane Pump oil sealed, driven by a single-phase electric motor.

 

Alcatel 2015 CP

By

The Alcatel 2015 CP vacuum pump is an oil sealed rotary vane pump with a nominal pumping speed of 10.6 cfm able to perform from atmosphere to the 10-4 mbar range. Alcatel 2015 pumps are designed to handle the requirements of the most sensitive applications of analytical instruments.  Is is a dual stage rotart vane vacuuum pump with a 3/4 hp motor that is setup to operate on Fomblin oil.

Alcatel 2015 CP, rebuilt.

Spectifactions:
Nominal Displacement: 10.6 CFM
Oil Capacity: 0.95 L
Motor: 115/208 single phase 3/4 HP

Features:

  • Compact simple design
  • Direct drive
  • forced lubrication system with built-in oil vane pump
  • Anti-suckback system
  • Quiet operation

 

Edwards E1M18 Rotary Vane Vacuum Pump (Used)

By

Oil Rotary Vane Pumps Single-Stage

Rotary vane pumps are considered wet, positive displacement pumps, with the term “wet” denoting that the gases being pumped are exposed to oil. The significant characteristic of oil sealed rotary vane (OSRV) pumps is the use of oil as a sealant and coolant.

 

Single-stage rotary vane vacuum pumps use a single stage compression offering high rough pumping speeds combined with a good enough ultimate pressure. They are widely used in industrial, and food industries.

E1M Single Stage RVP

Small E1M oil sealed rotary vane pumps are robust products that serve the industrial markets for many years. E1M is still widely used where our customers request robustness and simplicity over best in class performance.

Features and Benefits

  • High quality oils – with additives to prolong life whilst not impacting vapor pressure.

 

Features:

  • Displacement 50 Hz 20.5m3h-1
  • Speed  50 Hz 17.0 m3h-1
  • Pressure Ultimate With Gas Ballast: 487 mTorr
  • Ultimate vacuum (total pressure) without gas ballast 22.5 mTorr
  • Inlet connection NW25 flange
  • Dual Stage, 100/200 V, Singe Phase, 50/60Hz Motor
  • S/N
  • Setup for Hydrocarbon Oil

 

Edwards E2M28 Rotary Vane Vacuum Pump (Rebuilt)

By

Oil Rotary Vane Pumps Two-Stage

Rotary vane pumps are considered wet, positive displacement pumps, with the term “wet” denoting that the gases being pumped are exposed to oil. The significant characteristic of oil sealed rotary vane (OSRV) pumps is the use of oil as a sealant and coolant.

Two-stage rotary vane vacuum pumps use a two stage compression offering high pumping speeds combined with low ultimate pressure. They are widely used in industrial, chemical, pharmaceutical, and food industries.

E2M Two Stage RVP

EM series pumps are rugged mechanical oil-sealed pumps with speeds ranging from 0.7 to 275 m3/hr (30 to 206 CFM). Compact and quiet, they feature advanced lubrication circuits, high reliability, and accessories to suit specific application needs.

EM products serve two major application sectors.

In scientific and laboratory applications, the E2M0.7-2.5 and E2M18/28 are the ideal partners for your turbomolecular pump.

In Industrial applications, E2M18/28, E2M40/80 and E2M175/275 offer very robust solutions in demanding applications.

 

Features:

  • Displacement 50 Hz 32.2 m3h-1 / 19 ft3min-1
  • Speed  50 Hz 27.5 m3h-1 / 16.2 ft3min-1
  • Pressure Ultimate With Gas Ballast: 11.25 mTorr
  • Ultimate vacuum (total pressure) without gas ballast 1 x 10-3 mbar / 7.5 x 10-4 Torr
  • Inlet connection NW25 flange
  • Dual Stage, 115/230 V, Singe Phase, 50Hz Motor
  • S/N 056062377
  • Setup for Hydrocarbon Oil

 

Edwards E2M28 Rotary Vane Vacuum Pump (Rebuilt)

By

Oil Rotary Vane Pumps Two-Stage

Rotary vane pumps are considered wet, positive displacement pumps, with the term “wet” denoting that the gases being pumped are exposed to oil. The significant characteristic of oil sealed rotary vane (OSRV) pumps is the use of oil as a sealant and coolant.

Two-stage rotary vane vacuum pumps use a two stage compression offering high pumping speeds combined with low ultimate pressure. They are widely used in industrial, chemical, pharmaceutical, and food industries.

E2M Two Stage RVP

EM series pumps are rugged mechanical oil-sealed pumps with speeds ranging from 0.7 to 275 m3/hr (30 to 206 CFM). Compact and quiet, they feature advanced lubrication circuits, high reliability, and accessories to suit specific application needs.

EM products serve two major application sectors.

In scientific and laboratory applications, the E2M0.7-2.5 and E2M18/28 are the ideal partners for your turbomolecular pump.

In Industrial applications, E2M18/28, E2M40/80 and E2M175/275 offer very robust solutions in demanding applications.

 

Features:

  • Displacement 50 Hz 32.2 m3h-1 / 19 ft3min-1
  • Speed  50 Hz 27.5 m3h-1 / 16.2 ft3min-1
  • Pressure Ultimate With Gas Ballast: 11.25 mTorr
  • Ultimate vacuum (total pressure) without gas ballast 1 x 10-3 mbar / 7.5 x 10-4 Torr
  • Inlet connection NW25 flange
  • Dual Stage, 220/240 V, Singe Phase, 50Hz Motor
  • S/N 027488554
  • Setup for Fomblin Oil

 

Edwards E2M30 Rotary Vane Vacuum Pump (Used)

By

Oil Rotary Vane Pumps Two-Stage

Rotary vane pumps are considered wet, positive displacement pumps, with the term “wet” denoting that the gases being pumped are exposed to oil. The significant characteristic of oil sealed rotary vane (OSRV) pumps is the use of oil as a sealant and coolant.

Two-stage rotary vane vacuum pumps use a two stage compression offering high pumping speeds combined with low ultimate pressure. They are widely used in industrial, chemical, pharmaceutical, and food industries.

E2M Two Stage RVP

EM series pumps are rugged mechanical oil-sealed pumps with speeds ranging from 0.7 to 275 m3/hr (30 to 206 CFM). Compact and quiet, they feature advanced lubrication circuits, high reliability, and accessories to suit specific application needs.

EM products serve two major application sectors.

In scientific and laboratory applications, the E2M30 are the ideal partners for your turbomolecular pump.

In Industrial applications, E2M30 offer very robust solutions in demanding applications.

 

Features:

  • Displacement 50 Hz 32.2 m3h-1 / 19 ft3min-1
  • Speed  50 Hz 27.5 m3h-1 / 16.2 ft3min-1
  • Pressure Ultimate With Gas Ballast: 11.25 mTorr
  • Ultimate vacuum (total pressure) without gas ballast 1 x 10-3 mbar / 7.5 x 10-4 Torr
  • Inlet connection NW25 flange
  • 220 V, Singe Phase, 50Hz Motor
  • PN A37415903
  • S/N 996201353
  • Setup for Hydrocarbon Oil

 

Edwards Gas Ballast Adapter Kit for nXDS Series Pumps, PN A73501809

By

These Edwards nXDS gas ballast purge adapters may be fitted in place of the original gas ballast control knob and used to supply an inert purge gas, such as nitrogen.

Gas Ballast adaptor kit is for nXDS pumps. Kit includes gas ballast adaptor and O-ring. This adaptor has a 0.25mm orifice to limit the flow into the Gas Ballast to about 1 litre/minute. The upstream pressure should be limited to less than 0.35 bar gauge.

Edwards nXDS6i Dry Scroll Pump (Rebuilt)

By

Dry Scroll Pumps

Dry scroll vacuum pumps are positive displacement pumps that use two spiral-shaped scrolls, one fixed and one orbiting, to trap and compress gas molecules. They are oil-free, low maintenance pumps that are commonly used for clean vacuum applications. Since they do not rely on oil for sealing and lubrication, they eliminate the risk of oil contamination and leakage, making them an environmentally-friendly choice.

We in Edwards are driving scroll technologies to its best and we are committed to offer the most sustainable solution now and in the future.

nXDSi Scroll Pumps

Edwards nXDS is the great new shape of dry vacuum pumping.

The nXDS has taken scroll vacuum technology to the next level. Improved performance, exceptional pumping capability, quiet operation and extended service intervals make nXDS the ultimate dry choice. The range covers pumping speeds from 6 to 20 m3/h.

nXDS6i

The nXDS6i is our entry performance model in the nXDS range. Standard variant suitable for a large variety of applications.

nXDS6i – 100-127/200-240V 1Ph 50/60Hz

The nXDS6i is our standard product variant which can be operated in a wide range of applications.

Features and Benefits

  • Quiet operation – Better working environment
  • Hermetically sealed for a lubricant-free vacuum environment – Contamination free process and no oil to dispose of
  • Low power consumption – Low cost of ownership
  • Intelligent and easy to use controls – Flexibility of operation
  • Superior vapor handling – Wider range of applications
  • Long service intervals – Maximized up-time

        Specifications:

  • Connection Inlet Flange: DN 25 ISO-KF (NW25)
  • Connection vacuum outlet flange: DN 25 ISO-KF (NW25)
  • Cooling Method: Air Cooling (forced – fan)
  • Pressure Ultimate: 15.00 mTorr
  • Power Supply Voltage: 1Ph 100-127/200-240V 50/60Hz

Edwards nXDS6iC Dry Scroll Pump (Rebuilt)

By

Dry Scroll Pumps

Dry scroll vacuum pumps are positive displacement pumps that use two spiral-shaped scrolls, one fixed and one orbiting, to trap and compress gas molecules. They are oil-free, low maintenance pumps that are commonly used for clean vacuum applications. Since they do not rely on oil for sealing and lubrication, they eliminate the risk of oil contamination and leakage, making them an environmentally-friendly choice.

We in Edwards are driving scroll technologies to its best and we are committed to offer the most sustainable solution now and in the future.

nXDSi Scroll Pumps

Edwards nXDS is the great new shape of dry vacuum pumping.

The nXDS has taken scroll vacuum technology to the next level. Improved performance, exceptional pumping capability, quiet operation and extended service intervals make nXDS the ultimate dry choice. The range covers pumping speeds from 6 to 20 m3/h.

nXDS6i

The nXDS6i is our entry performance model in the nXDS range. Standard variant suitable for a large variety of applications.

nXDS6iC – 100-127/200-240V 1Ph 50/60Hz

The nXDS6iC has been modified so that it is more suitable for use on vapour handling processes and may be used in some applications involving corrosive substances. This chemically resistant version is fitted with Chemraz® internal valve pads and stainless steel fittings.

Features and Benefits

  • Quiet operation – Better working environment
  • Hermetically sealed for a lubricant-free vacuum environment – Contamination free process and no oil to dispose of
  • Low power consumption – Low cost of ownership
  • Intelligent and easy to use controls – Flexibility of operation
  • Superior vapor handling – Wider range of applications

Long service intervals – Maximized up-time

Specifications:

  • Connection Inlet Flange: DN 25 ISO-KF (NW25)
  • Connection vacuum outlet flange: DN 25 ISO-KF (NW25)
  • Cooling Method: Air Cooling (forced – fan)
  • Pressure Ultimate: 15.00 mTorr
  • Power Supply Voltage: 1Ph 100-127/200-240V 50/60Hz

Edwards RV12 Rotary Vane Vacuum Pump (Used)

By

The Edwards RV12 is the industry-standard dual-stage rotary vane pump, celebrated for its quiet operation and exceptional reliability. It is a versatile workhorse, capable of high-performance pumping across a variety of applications, including wet, dusty, and clean dry environments. This unit is in excellent condition and has been fully tested to ensure it meets original performance specifications.

 

Specifications
  • Model: RV12 (Catalog Number: A65501906)
  • Pump Type: Dual-Stage Rotary Vane
  • Pumping Speed (60Hz): 10 CFM (17 m³/hr)
  • Ultimate Pressure: 2×10-3 mbar (1.5×10-3 Torr without gas ballast)
  • Inlet Flange: NW25
  • Exhaust Flange: NW25
  • Motor: Single Phase, 100-120/200-230 VAC
  • Weight (without oil): 29 kg (63.8 lb)

Inland Semi-synthetic Hydrocarbon Fluid 19 Ultra, 1 Quart

By

Inland ULTRA Fluids

Inland ULTRA® products are semi-synthetic hydrocarbon fluids designed to endure thermal and chemical stresses much better than standard vacuum pump fluids. The ultra-refined process eliminates nitrogen, sulfur, oxygen, and aromatic hydrocarbons, leaving a clear base stock virtually free of impurities.

The additive package will not volatize under thermal stress; the antioxidant will stay in solution and bond up to four times as many radicals as other antioxidants, extending the life of the pump and the fluid.

Inland ULTRA Fluids

  • Good thermal stability
  • Oxidation resistant
  • Hydrotreated
  • Low vapor pressure
  • Long fluid life

Inland ULTRA Fluids

  • Mass spectrometry
  • Electron microscopy
  • Thin film sputtering
  • Vacuum distillation and impregnation
  • UHV surface analysis
  • Vacuum furnaces and heat treatment
  • EB welding
  • Vacuum tube evacuation
  • Vacuum metallization
  • Chemical pumping

Inland 19 ULTRA Specifications

  • Vapor Pressure at 25ºC (torr): <1×10-6
  • Boiling Point at .01 torr  (ºC): 166
  • Viscosity at 40ºC (cSt): 55
  • Pour Point (ºC): -10
  • Flash Point (ºC): 247
  • Density at 25ºC (g/ml): 0.86
  • Color: Clear

MSDS

 

Inland Semi-synthetic Hydrocarbon Fluid 19, 1 Gallon

By

Inland ULTRA Fluids

Inland ULTRA® products are semi-synthetic hydrocarbon fluids designed to endure thermal and chemical stresses much better than standard vacuum pump fluids. The ultra-refined process eliminates nitrogen, sulfur, oxygen, and aromatic hydrocarbons, leaving a clear base stock virtually free of impurities.

The additive package will not volatize under thermal stress; the antioxidant will stay in solution and bond up to four times as many radicals as other antioxidants, extending the life of the pump and the fluid.

Inland ULTRA Fluids

  • Good thermal stability
  • Oxidation resistant
  • Hydrotreated
  • Low vapor pressure
  • Long fluid life

Inland ULTRA Fluids

  • Mass spectrometry
  • Electron microscopy
  • Thin film sputtering
  • Vacuum distillation and impregnation
  • UHV surface analysis
  • Vacuum furnaces and heat treatment
  • EB welding
  • Vacuum tube evacuation
  • Vacuum metalization
  • Chemical pumping

Inland 19 ULTRA Specifications

  • Vapor Pressure at 25ºC (torr): <1×10-6
  • Boiling Point at .01 torr  (ºC): 166
  • Viscosity at 40ºC (cSt): 55
  • Pour Point (ºC): -10
  • Flash Point (ºC): 247
  • Density at 25ºC (g/ml): 0.86
  • Color: Clear

MSDS

 

Inlet Strainer Assembly RV, A22305067

By

The Inlet Filter Assembly for Edward Rotary Vane Pumps Series, RV 3, RV 5, RV 8, and RV 12

These filters ensure clean and contaminant-free operation, extending the lifespan of your vacuum pump while maintaining peak performance.

DN-25 KF

PolVac Corp.

2442 EMRICK BLVD.
BETHLEHEM, PA 18020

(610) 625-1505

Email: Info@PolVac.com

Business Hours:

Monday – Friday: 6:00am – 3:00pm EST

Connect with Us

Email us
Call us
Facebook
LinkedIn